This machine is applicable for packing powder, granule, liquid in form of stand up pouch, with different patterns of sealing, which include processes of stand up pouch forming, product dosing, filling and sealing.
 

Film Unwinding Process

Note: the gusset hole punching process applies for stand-up pouch
Pouch Forming Process

Pouch Filling Sealing Process

Note:

1. The product filling process can be 1 to 4 station according to project requirement

Standard Features
 

1. Standard stand up pouch form fill and seal
2. Rigid carbon steel structure with plastic spraying process and covered by stainless steel 304
3. Anodic oxidation and/or harden aluminum for main movement beam and pouch holding bars
4. Stainless steel 304 for product touching parts
5. PLC & Touch Screen HMI Control
6. Intelligent PID temperature controller
7. Servo motor for film pre-pulling and bottom hole punching
8. Easy pouch length adjustment
9. Twice product filling, twice vertical sealing processes
10. Pouch vacuum and mechanical opening
11. Vacuum system powered by vacuum pump with negative pressure tank
12. Individual pressure tank for different compress air supplies
13. Pouch not open completely, no fill and seal interlock
14. Central lubrication system for punching device and other key mechanical parts
15. Visual Protective Cover
16. Cold Embossing type coding

Optional Features
 

1. Flat pouch
2. Irregular shaped stand up pouch
3. Stainless steel 316 for product touching parts
4. Automatic film offset correction system
5. Top aligned cutting
6. Tear notch
7. Ribbon, inkjet or laser coding
8. Cold sealing with chiller
9. AB Control System