Automatic non-tray heat shrink packing machine
This labeling machine is mainly for PVC, PET. OPS label, belongs to sleeve labeling machine
Ranges: Mineral water, beverage, beer, wine, medicine bottles group packing without bottom tray. Your products will look better and firmer after packing.
1. Suitable electrical source: 50Hz/380V, three phase, five wire stype
2. Power: Prox28KW.
3. Working air pressure: Dry air ≥ 0.6MPa, air consumption: 25m3/H.
4. The packing speed: 20-25bag/minute.
5. The material of bottle: Glass bottle \pop can \PET and heat-resistance temperature 200° And other materials.
6. Suitable bottle diameter: Φ 60-90Φ Mm, height≤ 330mm.
7. The packing material: PE hot shrinking film, thickness: 0.03-0.10mm, the max width of film: 600mm
8. The weight of whole machine: 1.5tonp
9. Heat shrinking passage dimension(L*W*H): 3700*920*1800
|The thickness of shrink film||0.03- 0.10mm (Can be designed as your special requirements)|
|The film' s max width:||600mm|
|Shrinkable bake temperature:||Can be arbitrary adjustable within room temperature~200 Celsius degree|
|The max packing speed:||8-12 packs/min (suits for your 5L, 2 bottles in one package)|
|Working air pressure:||Dry air ≥ 0.5MPa|
|Conveyor level height, the position of enter material and dimension||Design as the customer' s request|
|Packaging type:||Two sides open, two sides seal|
|Shrink film:||PE, POF, PV etc.|
|Suitable bottle-type||Glass bottle, pop can, PET bottle and other material which 200 Celsius degree temperature-resistant|
|Dimension (mm)||5950× 4500× 1800mm|
The initial installation is not included with the professional member. All installation with our team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled.
While our professional member arrives at the site for a completed and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days . The actual installation days many vary, based on different machine mode and packing lines. Each day of working hour consist at 8 working hours. Any additional day will be charge according to our service fee listed below.
When initial installation is being called for our professional member required, the surcharge will be made advance by the purchase at US$80/person/day plus all travel expenses. Travel expenses include documentation fees visa charge); local and destination transportation charges air, train, ferry, bus, taxi or any means of transportation required to arrive to/from destination); accommodation (minimum of 3 star hotel facility) and 3 daily hot meals.
If translator is required and can't be provided by purchaser then we will provide a translator for same charge as initial installation stipulated above. All communicate with our engineer should be in Chinese. Any translation provide by us will be based between English and Chinese only. Purchaser is responsible for the translation between local language and English.
All parts are under two Year Warranty with defects from manufacturer. Any other defect caused by human error, mishandling, wear-and tear & any foreseeable conditions will not be covered by this warranty. All electronic parts and component can be guaranteed by original part's manufacturer or our company.
30% of the total contract amount is to be T/T into assigned account at the period of 5 working days after the Purchase contract is signed.
70% of the balance must to be made via T/T of the remainder balance amount of the purchase contract before the ordered equipment is to be delivered 10 working days prior of the shipment.
We also accept L/C payment, 30% down payment, and 70% L/C at sight