3-in-1 filling machine, combined with rinsing, filling and capping. It is innovated and designed in the requirement of still pure water and mineral water, on the bases of introducing, digesting and absorbing advanced technology from Germany and Italy.
LFD series bottle water filling machine water filling machine line is used to filling mineral water or juice drink,carbonated beverage into PET bottle from 200ml-2000ml.Glass bottle can also used. It just need to change the conveyor parts.Different models can satisfy various requirement of output from 2000B/H to 24000B/H.
The whole process is automatic ,suitable for PET plastic bottle filling juice beverage,gas carbonated drink and soda pure water.Filling way using the gravity or micro pressure filling ,make the speed faster and more stable,so compared with the same model our machine output is higher and more efficient.
The machine adopts advanced Mitsubishi programmable controller(PLC) to control the machine adopts advanced automatically, interworking with inverter with inverter running more stable and reliable the photoelectric sensor detect all part running state with high degree of automation, easoperation.
|Suitable Bottle||PET Bottle ,Plastic Bottle|
|Diameter of bottle||Diameter: 55-110 MM|
|Height Of Bottle||150-310MM|
|Suitable Cap||Plastic Screw Cap|
|Main Motor Power||1.2kw||1.5kw||3kw||3kw||3kw||5.5kw|
Air conveyor is horsed on the floor, with fan installed on the top. Air filter is positioned at every
entrance of air fan, to prevent dust blown into bottles. Bottles are blocked on the neck in the
conveyor and transported into filling machine by blowing power. All are made of stainless steel
ANSI304, except the horses, board of plastic and nylon.
1. Model of fan: LFD-9;
2. Power fan: 2.2 KW/Unit; flowing capacity: 2800m3/h; full pressure: 1650MPa; rotation speed: 2840r/min; weight:38kg
3. Length of air conveyor: according to plant layout
1.Stable conveying, using synchronous chasing control between the conveying belt and engine, making bottles in good condition in the conveying: non-falling, non-block, non-jam.
2. Conveying belt is designed by module, component can be interchanged easily, with compact structure, low noise, easy assembling and maintaining, good flexibility to combine the bottle type according to the different capacity.
3. The design of electrical control is advanced and rational, we can design the control method , select the electrical control component according to client's layout, to improve the conveying stability
4. Set the switch according to conveying system layout or customers' reasonable requirement, for the convenience of operation.
5. Belt lubricating system is equipped
6.Main part all using ANSI304
7. Fringe board is using the U.S. Rexnord technology to produce
Packing and Shipping :
Before the order:
We will make detailed solution for you based on your requirments.
We will send you videos of our products to know more about our machines.
If you are willing to visit our factory,we will pick you up at a nearby airport/station.
After the order:
We will start to produce machines and update the progress.
Our engineer will draw the layout for you.
Arrange our engineer to your factory to install machines if you need,train your employee until they can operate machines well.
Provide you 2 years warranty with spare parts 2 year free.
24 hours for engineer response (all services part 5days in customer hand by Intl' courier)Related products: